Percentages are easy until the base changes. "What is 18% of 2,450?" has one obvious answer. "The price went up 25% and then down 25%, so it is back where it started" sounds obvious and is wrong. Most percentage mistakes in shopping, pricing and reporting come from forgetting which number the percentage is a percentage of.
This guide covers the calculations that come up again and again, each with a worked example: the three basic percentage questions, percentage change versus percentage points, reverse percentages, stacked discounts, markup versus margin, and how discounts interact with GST.
The three basic questions
Nearly every percentage problem is one of three forms. Identify which before you start.
1. What is X% of Y? result = X / 100 × Y
18% of 2,450 = 0.18 × 2,450 = 441
2. What percent is A of B? percent = A / B × 100
45 out of 60 = 45 / 60 × 100 = 75%
3. Y is X% of what number? base = Y / (X / 100)
441 is 18% of = 441 / 0.18 = 2,450Percentage change and percentage points
Percentage change always uses the starting value as the base: (new − old) / old × 100. A price that rises from ₹80 to ₹100 has gone up 25%. If it then falls back from ₹100 to ₹80, it has gone down 20%, not 25%, because the base is now ₹100. This asymmetry gets bigger with size: a 50% fall needs a 100% rise to recover.
When the quantity is already a percentage, such as an interest rate or a conversion rate, say percentage points for the arithmetic difference. A loan rate that goes from 8% to 9% has risen by 1 percentage point, which is a 12.5% increase in the rate. A conversion rate that goes from 2% to 3% is up 1 point, or 50%. Both statements are true; mixing them up is how reports end up exaggerating or underplaying a change.
Reverse percentages: finding the original
When you know a value after a percentage was applied and want the value before, divide; do not apply the opposite percentage. A jacket costs ₹1,600 after 20% off. The original price is 1,600 / 0.8 = ₹2,000. Adding 20% to ₹1,600 gives ₹1,920, which is wrong, because the 20% was taken from ₹2,000, not from ₹1,600.
The same pattern appears everywhere: a salary after a 10% hike is ₹66,000, so the old salary was 66,000 / 1.1 = ₹60,000; a GST-inclusive price of ₹1,180 at 18% has a base of 1,180 / 1.18 = ₹1,000.
Stacked discounts do not add up
"20% off, plus an extra 10% at checkout" is not 30% off. The second discount applies to the already-reduced price. Multiply the remaining fractions: 0.8 × 0.9 = 0.72, so you pay 72% and the combined discount is 28%. On a ₹5,000 item, the first discount takes it to ₹4,000 and the second to ₹3,600. A straight 30% would have been ₹3,500.
The order does not matter for percentage discounts (0.9 × 0.8 is also 0.72), but it does matter when one of them is a flat amount. ₹500 off and then 10% off ₹5,000 gives ₹4,050; 10% off and then ₹500 off gives ₹4,000. Retailers usually choose the order that favours them, so read the terms.
Combined discount = 1 − (1 − d1) × (1 − d2) × ...
20% then 10%: 1 − 0.8 × 0.9 = 28%
50% then 20%: 1 − 0.5 × 0.8 = 60%
10%, 10%, 10%: 1 − 0.9 × 0.9 × 0.9 = 27.1%Markup vs margin
Both describe the same profit, measured against different bases. Markup is profit as a percentage of cost; margin is profit as a percentage of selling price. An item bought for ₹800 and sold for ₹1,000 has ₹200 profit: a 25% markup (200 / 800) and a 20% margin (200 / 1,000). Confusing them is a classic pricing error: a seller who wants a 30% margin and adds 30% to cost ends up with a 23.1% margin.
- Price for a target margin: price = cost / (1 − margin). Cost ₹700, 30% margin: 700 / 0.7 = ₹1,000.
- Price for a target markup: price = cost × (1 + markup). Cost ₹700, 30% markup: ₹910.
- Convert markup to margin: margin = markup / (1 + markup). A 25% markup is 0.25 / 1.25 = 20% margin.
- Convert margin to markup: markup = margin / (1 − margin). A 20% margin is 0.2 / 0.8 = 25% markup.
Discount before or after tax?
For a percentage discount, the final price is the same whichever you apply first. A ₹1,000 item at 18% GST with 10% off costs 900 × 1.18 = ₹1,062, and 1,180 × 0.9 is also ₹1,062. What differs is the tax: in the correct version, GST is charged on the discounted value (₹162), not the full price (₹180).
For a flat discount the order changes the price. ₹100 off before tax gives (1,000 − 100) × 1.18 = ₹1,062. Taking ₹100 off the tax-inclusive ₹1,180 gives ₹1,080. Under GST, a discount shown on the invoice at the time of sale reduces the taxable value, so sellers should apply it before calculating tax. Discounts given after the sale, such as year-end rebates, follow separate rules and generally need a credit note.
Do it quickly
For "X% of Y", use the Neemtools Percentage Calculator. For a sale price and savings, the Discount Calculator does one discount at a time; for stacked offers, run it twice, feeding the first final price into the second calculation. To add or remove GST after discounting, switch to the GST Calculator. These are arithmetic aids, not financial or tax advice.